How to skillfully use wallpaper to decorate your h

  • Detail

Wallpapers with different materials and patterns have different applicable spaces and accessories. How to create an atmosphere properly requires an in-depth interpretation

we should not be too persistent when buying wall paint, such as scrub resistance. There is no need to pursue it too much, because it has little practical significance. Instead, we should pay attention to the actual basic performance of the paint

now people's requirements for latex paint are no longer limited to decoration, but also attach importance to functionality. Therefore, when purchasing, the function of latex paint is very important, and latex paint should be selected according to different parts of painting. For example, the latex paint used on the walls of bedrooms and living rooms requires strong adhesion, fine texture, good differentiation resistance and permeability; The emulsion paint of kitchen and bathroom shall be waterproof, mildew proof and easy to wash

inferior latex paint not only affects the construction quality, but also contains unqualified chemical raw materials that can harm human health. You should try to buy it in franchised stores or special distribution stores. When purchasing, you should check the package, appearance and internal quality of the product in detail

after opening the cover, the truly environmentally friendly latex paint should be water-based, non-toxic and tasteless, so when users smell, if the latex paint has a pungent smell or industrial essence flavor, it is not an ideal choice

after a period of time, the surface of genuine latex paint will form a thick elastic oxide film, which is not easy to crack, while the defective product will only form a thin film, which is fragile and has a pungent smell

mix the emulsion paint with a wooden stick, and then pick it up with a wooden stick. When the high-quality emulsion paint flows down, it will form a fan shape

touch with your fingers, and the authentic emulsion paint should feel smooth and delicate

when the emulsion paint is applied to the wall and wiped with a wet cloth, the color of the genuine product is as bright as new, while the inferior product will fade with a gentle wipe because of its poor condensation and water resistance

look at the ingredients when purchasing. The ingredients of high-quality paint should be copolymer resin or pure acrylic resin

don't forget to look at the shelf life of the product

although emulsion paint has many advantages, such as convenient construction, strong covering power, rich colors, scrub resistance, strong environmental protection, etc., it will also have some common quality problems, which will affect the decoration quality if not handled well

uneven wall flowers and colors

mainly because the color of the base is different, and it is not treated. In this case, the primer must be brushed again to cover it. In addition, when choosing materials, you should pay attention to the same manufacturer, the same variety and the same batch number, otherwise there will be color difference

rough surface

the main reasons are that the base treatment is not clean, the brush has sand particles, debris or the operating environment is not clean. First, clean the base course, thoroughly clean the brush, and make the environment dustproof. The main reason for peeling is that the base course is too smooth or greasy. If the base course is too bright, the steel brush can be used to brush the base course and clean it, and the oil stain can be decontaminated with solvent

wall cracking

this phenomenon is the most common, and the specific reasons depend on the situation. If it is GRC light partition wall, the joints should be carefully treated to prevent cracks. Generally, glass wool cloth or kraft paper is used. The characteristics of the partition board are prone to small cracks. Therefore, in order to ensure that there are as few cracks as possible, it is best to fully paste glass wool cloth or bean wrapped cloth once in the home decoration. If the putty of the sand ash wall needs to be removed, it is best to paste gypsum board or remove the sand ash to the base after the putty is removed; If it is a load-bearing wall or a solid wall, the reason for the cracking may be that the putty is too thick or the interval is short, and the putty is not dry. In this case, there are many cases of wall top leveling during the reconstruction of the old house, which should be paid attention to in the construction





Copyright © 2011 JIN SHI